| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.00 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.20 INCHES MINIMUM AND 0.32 INCHES MAXIMUM |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
5.00 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
2.00 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.94 INCHES MINIMUM AND 1.06 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.13 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
11.94 INCHES MINIMUM AND 12.06 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
4.94 INCHES MINIMUM AND 5.06 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
3 |
| AGAV |
III END ITEM IDENTIFICATION |
4910-01-539-6129 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
TORQUE WRENCH BRACKET |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| ADLL |
SECOND LEG LENGTH |
1.94 INCHES MINIMUM AND 2.06 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.13 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
11.94 INCHES MINIMUM AND 12.06 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
