| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.18 INCHES MINIMUM AND 0.20 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
3.5 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.24 INCHES MINIMUM AND 1.26 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
2 |
| AGAV |
III END ITEM IDENTIFICATION |
4210-01-627-0524 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| HEAT |
III HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
RESTRAINT BRACKET |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.35 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.38 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.74 INCHES MINIMUM AND 2.76 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.12 INCHES MINIMUM AND 0.14 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.94 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.18 INCHES MINIMUM AND 0.20 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
3.5 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
