| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.530 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
3.100 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
MOUNT ASSEMBLY,LEFT HAND ARM UPPER |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.505 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.880 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.625 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.615 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.500 INCHES NOMINAL |
