| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.44 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
16.58 INCHES MINIMUM AND 16.64 INCHES MAXIMUM |
| AHPZ |
CENTER SECTION HEIGHT |
0.72 INCHES MINIMUM AND 0.78 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.18 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
16.58 INCHES MINIMUM AND 16.64 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.97 INCHES MINIMUM AND 1.03 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
3 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AGAV |
III END ITEM IDENTIFICATION |
SLIDE RAIL, JACK PLATE, REAR (DRIVER SIDE) |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
AN/TPN-31(V) 7 |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
0.97 INCHES MINIMUM AND 1.03 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.18 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FINISH IS IRIDITE COAT, THEN PRIME AND PAINT. BRACKET HAS (3) TOTAL MOUNTING HOLES THAT HAVE .20 INCH DIAMETER .65 INCHES DEEP WITH .25-20UNC THREADING .50 INCHES DEEP. |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
