| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
26.2 MILLIMETERS MINIMUM AND 27.8 MILLIMETERS MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.0747 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
66.2 MILLIMETERS MINIMUM AND 67.8 MILLIMETERS MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
5.0 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.8 MILLIMETERS NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
2 SLOTS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
39.0 MILLIMETERS NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
15.9 MILLIMETERS NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
11.0 MILLIMETERS NOMINAL |
| AHQN |
FIRST LEG WIDTH |
66.2 MILLIMETERS MINIMUM AND 67.8 MILLIMETERS MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
34.2 MILLIMETERS MINIMUM AND 35.8 MILLIMETERS MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
12.0 MILLIMETERS NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLM |
FIRST LEG SLOT WIDTH |
9.0 MILLIMETERS NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.0747 INCHES NOMINAL |
| AGAV |
III END ITEM IDENTIFICATION |
6115015617455 |
| MATT |
MATERIAL |
STEEL |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET,SUPPORT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
11.0 MILLIMETERS NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
9.0 MILLIMETERS NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
5.0 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
30.0 MILLIMETERS NOMINAL |
| ADLL |
SECOND LEG LENGTH |
26.2 MILLIMETERS MINIMUM AND 27.8 MILLIMETERS MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
9.53 MILLIMETERS NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.0747 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
66.2 MILLIMETERS MINIMUM AND 67.8 MILLIMETERS MAXIMUM |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
