| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
0.190 RADIANS NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.630 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.406 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.1875 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.630 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.940 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AGAV |
III END ITEM IDENTIFICATION |
2320-01-534-2245 |
| MATT |
MATERIAL |
STEEL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, GLADHAND, LH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.840 INCHES NOMINAL |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.060 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.290 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
7.190 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CHAMFERED ENDS |
| AHLH |
SECOND LEG END WIDTH |
1.870 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
1.060 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.1875 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
3.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SMALLER HOLE ON SECOND LEG IS 0.312 INCHES (NOM) |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PAINT |
