| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
76.0 DEGREES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
5.000 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.260 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
5.00 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.880 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
11.75 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.190 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AGAV |
III END ITEM IDENTIFICATION |
4910-01-539-6129 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANGLE PLATE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
B221 ASSN STD 1ST MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC AND PRIMER |
