| MRC |
Requirement Statement |
Characteristics |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
17.71 INCHES MINIMUM AND 17.73 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.00 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
8 |
| AGAV |
III END ITEM IDENTIFICATION |
5895-01-592-8791 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
TRAY, DSU DRAWER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B308 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.42 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.59 INCHES MINIMUM AND 0.61 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
16.515 INCHES MINIMUM AND 16.525 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.396 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.00 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
17.71 INCHES MINIMUM AND 17.73 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FIRST LEG HAS (6) .192 INCH DIAMETER THRU HOLES. |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-5541, TYPE 1, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
