| MRC |
Requirement Statement |
Characteristics |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
3.620 INCHES MINIMUM AND 3.630 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
10.870 INCHES MINIMUM AND 10.880 INCHES MAXIMUM |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.620 INCHES MINIMUM AND 3.630 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.74 INCHES MINIMUM AND 0.76 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.24 INCHES MINIMUM AND 1.26 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
16.99 INCHES MINIMUM AND 17.01 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.25 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
8 |
| AGAV |
III END ITEM IDENTIFICATION |
5895-01-592-8791 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
ANGLE, EQUIPMENT DRAWER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLU |
SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
7.245 INCHES MINIMUM AND 7.255 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.5 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.24 INCHES MINIMUM AND 1.26 INCHES MAXIMUM |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
7.245 INCHES MINIMUM AND 7.255 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.25 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.265 INCHES MINIMUM AND 0.272 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
16.99 INCHES MINIMUM AND 17.01 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FIRST LEG HAS (5) THRU HOLES ALONG THE LENGTH. |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-5541, TYPE 1, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
