| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
20.60 INCHES MINIMUM AND 20.66 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
16.24 INCHES MINIMUM AND 16.26 INCHES MAXIMUM |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.00 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
3.00 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.4 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.84 INCHES MINIMUM AND 0.86 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
11.69 INCHES MINIMUM AND 11.71 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.27 INCHES MINIMUM AND 1.33 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ASXK |
HOLE QUANTITY |
19 |
| AGAV |
III END ITEM IDENTIFICATION |
5895-01-592-8791 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
COUNTERSUNK AND PLAIN |
| HEAT |
III HEAT TREATMENT |
H-32 STRAIN HARDENED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
PLATE, TOP |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| ADLL |
SECOND LEG LENGTH |
0.67 INCHES MINIMUM AND 0.73 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
11.24 INCHES MINIMUM AND 11.26 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
BRACKET HAS (19) TOTAL HOLES. THE FIRST LEG HAS (5) MOUNTING HOLES, (3) WITH .375 INCH THRU DIAMETER, AND (2) WITH .500 INCH THRU DIAMETER. CENTER SECTION HAS (14) HOLES, (6) WITH .350 INCH THRU DIAMETER COUNTERSUNK TO .515 INCHES AT 82 DEGREES. REMAINING |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-5541, TYPE 1, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
