| MRC |
Requirement Statement |
Characteristics |
| AHQB |
CENTER SECTION THICKNESS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.250 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
2 |
| AGAV |
III END ITEM IDENTIFICATION |
2350-01-577-0830 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
H-32 STRAIN HARDENED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
SUPPORT, RIGHT HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4016 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.250 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
PROTECTIVE FINISH PER 19207-12577737 PARAGRAPH 2.4. COLOR IS TAN 686A, CHIP NUMBER 33446 PER FED-STD-595. |
