| MRC |
Requirement Statement |
Characteristics |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CWPD |
FIRST LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
0.490 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.0261 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.380 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.090 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CHAMFERED ENDS |
| MATT |
MATERIAL |
STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316 |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
PIN LANYARD MOUNTING TAB |
| CWPG |
SECOND LEG CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| AHLH |
SECOND LEG END WIDTH |
0.490 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.090 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-DTL-13924D,CLASS4 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
OXIDE |
