| MRC |
Requirement Statement |
Characteristics |
| AHPZ |
CENTER SECTION HEIGHT |
10.81 INCHES MINIMUM AND 10.87 INCHES MAXIMUM |
| AHQB |
CENTER SECTION THICKNESS |
0.125 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
2.390 INCHES MINIMUM AND 2.410 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.211 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
7.190 INCHES MINIMUM AND 7.210 INCHES MAXIMUM |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
2.400 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.22 INCHES MINIMUM AND 0.28 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.25 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
7.72 INCHES MINIMUM AND 7.78 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.78 INCHES MINIMUM AND 0.84 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ASXK |
HOLE QUANTITY |
6 |
| AGAV |
III END ITEM IDENTIFICATION |
2320-01-552-7781 |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| HEAT |
III HEAT TREATMENT |
H-32 STRAIN HARDENED |
| CXCY |
III PART NAME ASSIGNED BY CONTROLLING AGENCY |
BRACKET, VAN LAPTOP MOUNT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS QQ-A-250/8 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.22 INCHES MINIMUM AND 0.28 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.25 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.211 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.92 INCHES MINIMUM AND 0.98 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.72 INCHES MINIMUM AND 1.78 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FINISH IS 7.2.2 OF MIL-STD-171, DYED BLACK, COLOR NUMBER 37038 PER FED-STD-595. |
| STYL |
STYLE DESIGNATOR |
ADJACENT ANGLES |
