| MRC |
Requirement Statement |
Characteristics |
| AECS |
BOLT HOLE QUANTITY |
2 |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.250 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| CQCF |
CONSTRUCTION |
LAMINATED |
| AAUB |
HOLE DIAMETER |
0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AGAV |
III END ITEM IDENTIFICATION |
ELEVATION DRIVE 1280001675549 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| BRDX |
LAMINATION QUANTITY |
40 |
| BRDY |
LAMINATION THICKNESS |
0.002 INCHES NOMINAL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.270 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.800 INCHES MINIMUM AND 0.860 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
HOLES ARE 0.250 IN. FROM LOWER EDGE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
