| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| MS3420-16 | MILITARY STANDARDS | 96906 | 2 | 2 | 2 | ||||
| 204-1006P7 | MILITARY STANDARDS | 3B150 | 5 | 1 | 2 | ||||
| CA18220-16 | MILITARY STANDARDS | 71468 | 5 | 1 | 2 | ||||
| 357-8439-000 | MILITARY STANDARDS | 13499 | 5 | 1 | 2 | ||||
| 115-25-7 | MILITARY STANDARDS | 88818 | 5 | 1 | 2 | ||||
| 357-8439-00 | MILITARY STANDARDS | 95105 | 5 | 1 | 2 | ||||
| 357-8439-000 | MILITARY STANDARDS | 95105 | 5 | 1 | 2 | ||||
| 461-058-016 | MILITARY STANDARDS | 7421 | 5 | 1 | 2 | ||||
| 3G100-479 | MILITARY STANDARDS | 80063 | 5 | 1 | 2 | ||||
| 8821538 | MILITARY STANDARDS | 19203 | 5 | 1 | 2 | ||||
| 108719-7 | MILITARY STANDARDS | 37695 | 5 | 1 | 2 | ||||
| MS3420-16 | MILITARY STANDARDS | 75Q65 | C | 1 | 2 | 9F | |||
| 18220-16 | MILITARY STANDARDS | 71468 | C | 1 | 2 | ||||
| 9779-513-16 | MILITARY STANDARDS | 77820 | C | 1 | 2 | 9F | |||
| AN342016 | MILITARY STANDARDS | 88044 | C | 1 | 2 | AC | |||
| 901771-07 | MILITARY STANDARDS | 90536 | 5 | 2 | 2 | ||||
| 913879 | MILITARY STANDARDS | F0302 | 5 | 2 | 2 | ||||
| MS3420-16 | MILITARY STANDARDS | 45152 | 5 | 9 | 2 | ||||
| MS39056-7 | MILITARY STANDARDS | 96906 | 5 | 9 | 2 | ||||
| 9779-513-16 | MILITARY STANDARDS | 2660 | 5 | 9 | 2 | ||||
| 5365001416943 | MILITARY STANDARDS | SCY13 | 5 | 9 | 2 | ||||
| 357-8439-00 | MILITARY STANDARDS | 13499 | 5 | 9 | 2 | ||||
| 204-1006P7 | MILITARY STANDARDS | 49956 | 5 | 9 | 2 | ||||
| 10118426 | MILITARY STANDARDS | A486G | 6 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON MRAP NO PERMANENT WSDC IDENTIFIED AND 153 OTHER WEAPON SYSTEMS INCLUDING Z9N - AIRCRAFT, FA-18, A - D, E/F, G (GROWLER) |
| BFKZ | BODY CORNER RADIUS | 0.062 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.927 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 2.062 INCHES NOMINAL |
| ADYT | CENTER HOLE DIAMETER | 0.750 INCHES NOMINAL |
| BWSF | CORNER RADIUS BETWEEN FLANGE AND BODY | 0.062 INCHES NOMINAL |
| APGF | DESIGN TYPE | SINGLE CENTRALLY LOCATED HOLE |
| ABKK | FLANGE DIAMETER | 1.314 INCHES NOMINAL |
| BWSD | FLANGE END HOLE CORNER RADIUS | 0.062 INCHES NOMINAL |
| AHGD | FLANGE HEIGHT | 0.062 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-417, TYPE S, CLASS SC, GRADE SC515A1B1C1E3E5F2GM MIL STD SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER CHLOROPRENE CLASS CR |
| AASF | NONMETALLIC HARDNESS RATING | 45.0 MINIMUM DUROMETER AND 55.0 MAXIMUM DUROMETER |
| ABHP | OVERALL LENGTH | 2.125 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | ROUND FLANGED |
