| MRC |
Requirement Statement |
Characteristics |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.750 INCHES NOMINAL |
| CQCF |
CONSTRUCTION |
ONE-PIECE |
| AGAV |
END ITEM IDENTIFICATION |
TAIL ASSEMBLY, UNIT 34 |
| AAUB |
HOLE DIAMETER |
0.648 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.546 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.656 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
3.750 INCHES NOMINAL |
| ADUM |
OVERALL THICKNESS |
0.032 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
3.000 INCHES NOMINAL |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SHIM, RUDDER ACTUATOR MOUNTING BRACKET |
| FEAT |
SPECIAL FEATURES |
HOLES ARE OVAL-SHAPED AND ARE 0.648-0.655 INCH WIDE BY 0.737-0.752 INCH |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/BOLT HOLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8635, TYPE III, CLASS I MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
