| MRC |
Requirement Statement |
Characteristics |
| AGAV |
END ITEM IDENTIFICATION |
E-2C HAWKEYE, AIRCRAFT |
| AECS |
BOLT HOLE QUANTITY |
2 |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.088 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| CQCF |
CONSTRUCTION |
ONE-PIECE |
| AAUB |
HOLE DIAMETER |
0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1015 |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.115 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.625 INCHES NOMINAL |
| ADUM |
OVERALL THICKNESS |
0.062 INCHES NOMINAL |
| ABMK |
OVERALL WIDTH |
0.180 INCHES MINIMUM AND 0.195 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
LOCK PLATE, SWITCH, SUBMINATURE |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416, TYPE 2 CLASS A FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM |
