| MRC |
Requirement Statement |
Characteristics |
| AECS |
BOLT HOLE QUANTITY |
1 |
| ADVJ |
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE |
0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| AHNX |
BOLT HOLE DIAMETER |
0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.000 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.404 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
OD 8853 MFR REF SINGLE MATERIAL RESPONSE |
| MATT |
MATERIAL |
STEEL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.496 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ADUM |
OVERALL THICKNESS |
0.297 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
SPACER |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR W/SQUARE CORNERS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-16232A,TY I MIL STD SINGLE TREATMENT RESPONSE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE |
